RedMax SGCZ2401S Manual De Instrucciones página 34

OP7
34
English
8. Operation
What's more, since the whole circle of the blade is
available for cutting, you can move the cutting head in
all directions and cut grass growing on such place
difficult-to-get with conventional trimmer.
You can even trim the waterside without splashing
water.
■ HOW TO USE
• Adjust the front handle to the most comfortable
position.
• Start the engine and pull the throttle lever gradually.
The blades will start moving as the engine speed
goes up.
• To stop the blade motion, simply release the throttle
lever. The clutch will disengage and the blades stop
moving while the engine keeps idling.
• Move the cutting head as sliding its bottom on the
ground. This will help you do the job with less effort.
NOTE
a) Avoid running the engine at full throttle with no load.
Continuous no load full throttle operation can cause
damage to the engine and the driveshaft.
b) Operation at too slow engine speed can cause
abnormal vibration of the machine, resulting in short
life of driveshaft and clutch parts. If you felt such
vibration, use a higher speed range.
c) Though the blades are made of steel harder than
conventional metal blades, continuous cutting in soil
will accelerate wear.