Publicidad
Idiomas disponibles
Idiomas disponibles
The fan has 12 different timer levels that can be set up to a maximum duration
of 12 hours in one hour steps. For this purpose, press the "Timer" button on the
remote control or the operating panel of the fan. Increase the duration of the timer
by pressing the button repeatedly. Press the "MODE" button to set the fan mode.
Here you can choose between three different modes.
Mode
Function
The fan rotates constantly at the adjusted speed in "Normal"
mode. You can enable the swing function if you select this
mode.
The fan rotates slowly in the "sleep" mode. The speed level de-
creases every half hour until it is at level 1 (assuming the mode
starts at a higher level). The display will go into standby mode
after 30 seconds. If you have set this mode, you can enable the
swivel function.
The fan rotates quickly in the "Natural" mode. You can enable
the swing function in this mode.
English
Timer and temperature
display
Speed level
3 different modes
Oscillation display
23
Publicidad
