Controllable Functions - LGB 25556 Manual Del Usario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 28
Function Mapping DCC
It is possible to assign functions controlled from the decoder to function buttons
of your choice (mapping). To do this an appropriate value must be entered in the
appropriate CV.
The CVs (lines) and the functions (columns) are listed in the tables on pages 40/41.
Four CVs belong to each button. For space reasons the 4 CVs were put together in
one line starting with CV 282 (Button F5).
It is basically possible to assign several functions to one button or one function to
several buttons.
Note: The programming for function mapping should be done only by experienced
users.
Individual functions can be controlled by means of SUSI depending on the design of
the decoder. These functions can be handled by the decoder as sound. The volume
levels belonging to these functions cannot be changed.
Examples of Function Mapping:
AUX 2 is to be forwards and backwards on Function 3
CV 272 & CV 372 = 8
CV 273 & CV 373 = 0
CV 274 & CV 374 = 0
CV 275 & CV 375 = 0
Sound 15 is to be shifted from forwards and backwards on Function 3 to Function 8.
The existing function at Function 8 is overwritten in the process.
CV 275 & CV 375 = 0
CV 273 & CV 373 = 0
CV 274 & CV 374 = 0
CV 275 & CV 375 = 0
CV 297 & CV 397 = 0
CV 298 & CV 398 = 0
CV 299 & CV 399 = 0
CV 300 & CV 400 = 4

Controllable Functions

Lighting *
Sound effect: Long Horn
Sound effect: Squealing brakes off
Sound effect: Short Horn
Sound: Horn sequence before a grade crossing
Sound effect: Compressor
Sound effect: Operating sounds *
Sound effect: Bell
Sound on/off
ABV, off
Sound effect: Cab radio
Double A switching light
Flashing light
Long distance headlights
Sound effect: Sanding
Number Board Lights
* active in analog operation
Note:
At www.LGB.de you will find a tool you can use to calculate different decoder set-
tings as well an extensive description of the decoder and the settings. Programming
the decoder settings with the 55015 Universal Hand Controller is also explained in
these instructions.
12
LV +LR
1
Sound 1
2
BS
3
Sound 2
4
Sound 7
5
Sound 13
6
FS
7
Sound 3
8
Sound 15
9
10
Sound 10
11
LV+LR+AUX1
12
AUX 2
13
AUX 3
14
Sound 4
15
AUX 4

Publicidad

Tabla de contenido
loading

Tabla de contenido