Description Of The Machine And Use; Description; Use; Identification - breviglieri Zappatrice b60pl Instrucciones De Empleo Y Mantenimiento

Damage deriving from negligence, carelessness, bad and im-
proper use of the machine or incorrect manoeuvres by the opera-
tor are also excluded from the warranty.
Removal of the safety devices with which the machine is equipped
shall automatically void the warranty and relieve the Manufac-
turer from all liability in merit.
The warranty also becomes void if spurious spare parts are used.
Even when covered by the warranty, the machine must be re-
turned Carriage Free.

1.3 DESCRIPTION OF THE MACHINE AND USE

Steerage hoe b60pl bears «CE» marking in compliance
with the European Union standards described in Directive
98/37/EC and successive modifications, as indicated in the
declaration of conformity with which each machine is pro-
vided.

1.3.1 DESCRIPTION

The machine mainly consists of a metal framework housing the
central hitch with three-point linkage (1 Fig. 1) and a bladed rotor
installed in the lower part (11 Fig. 1) driven by a chain or gears
situated in the side housing (7 Fig. 1).
The power required to operate the machine is transmitted by the
tractor via a driveline (with CE marking) which meshes with the
gearbox/final drive unit in a central position (5 Fig. 1), and is sub-
sequently transmitted to the gears by a drive shaft.
KEY to Fig. 1
A Front part
B Rear part
C Left side
D Right side
1 Three-point hitch linkage
2 Upper 3-point hitch
3 Machine lifting point
4 Driveline support
5 Gearbox/final drive unit
6 Hood adjuster ram
7 Side transmission unit
8 Safety guards
9 Hood
10 Bearing stand
11 Bladed rotor
12 Lower 3-point hitch
13 Power take-off
14 Driveline shield
15 Work depth adjuster skid
16 Skid adjuster bolt
17 Identification plate

1.3.2 USE

Steerage hoe b60pl has solely been designed for use
in agriculture in order to work and break up the soil.
One single operator seated on the tractor is able to carry out
the various tillage operations.
Any other use of the machine differing from the explanations
given in this manual relieves for Manufacturer from all and
every liability for deriving damage to persons, animals or
property.
b60pl

1.4 IDENTIFICATION

Each machine is provided with an identification plate (17 Fig. 1)
with the following data:
- Manufacturer's name and address;
- «CE» marking;
- A) Machine model;
- B) Machine version;
- C) Serial number;
- D) Weight (in Kg);
- E) Year of manufacture.
The data on the identification plate of the machine should be cop-
ied into the last page of this manual and must always be stated
when spare parts and/or assistance are required.
Standard machine supply includes:
- Operation and maintenance manual for the machine;
- «CE» declaration of conformity.

1.5 NOISE LEVEL

The sound level has been measured in compliance with
current standards, with the following results:
- Acoustic pressure LpAm (A) .......................... dB
- Acoustic power LwA (A) ................................. dB

1.6 TECHNICAL SPECIFICATIONS

Model HP
MACHINE WITH BONNET
b60pl 130 30-45
b60pl 155 35-50
b60pl 185 45-60
b60pl 205 55-70
MACHINE WITH SPIKED ROLLER
b60pl 130 30-45
b60pl 155 35-50
b60pl 185 45-60
b60pl 205 55-70
MACHINE WITH CAGE ROLLER
b60pl 130 30-45
b60pl 155 35-50
b60pl 185 45-60
b60pl 205 55-70
- 16 -
b60pl
Machine width Tines
Kg work. dimens. N°
365 130 145 30
395 155 170 36
425 185 200 42
450 205 220 48
440 130 145 30
470 155 170 36
510 185 200 42
540 205 220 48
450 130 145 30
480 155 170 36
520 185 200 42
550 205 220 48
83.6
98.5
Kg/max
Depth (*)
8-20 365
8-20 395
8-20 425
8-20 450
8-20 440
8-20 470
8-20 510
8-20 540
8-20 450
8-20 480
8-20 520
8-20 550