Cutting Depth; Supporting Large Sheets; Service And Maintenance; Environment - Festool STM 1800 Manual De Instrucciones Original

WARNING
Risk of accidents
► Clamp the workpieces with screw clamps
* Not included in the scope of delivery.
► For safety reasons, always lock the brakes
when working.
9.1

Cutting depth

CAUTION
Damage to the wooden supports and the
folding frame
► Set the cutting depth to a maximum of
10 mm deeper than the thickness of the
workpiece (Fig. 11).
9.2

Supporting large sheets

Using the tilting function of the mobile saw
table and work bench, a single person can
support a sheet with dimensions
≤ 3100 mm x 2150 mm.
WARNING
Risk of accidents
► Sheets > 3100 mm x 2150 mm must be
placed and additionally supported on the
mobile saw table and work bench by two
people without the use of the tilting func­
tion.
► Turn both supporting feet [12-1]
upwards.
► Pull the extendable tubes with
supporting feet [12-2] out of the folding
frame (see section
► Lean the large sheet against a wall.
► Tilt the mobile saw table and work bench
onto the supporting feet [12-3].
► Lock the brakes [12-4] (see section
► Lift the plate onto the supporting
feet [12-3] and lean it against the wooden
supports [12-5] of the mobile saw table and
work bench.
► Tilt the mobile saw table and work bench
back into the horizontal position.

10 Service and maintenance

Customer service and repairs must
only be carried out by the manufac­
turer or service workshops. Find the
nearest address at:
www.festool.co.uk/service
7.3 ).
7.2
Always use original Festool spare
EKAT
4
parts. Order no. at:
www.festool.co.uk/service
5
3
2
1
.
*

11 Environment

Do not dispose of the device in the
household waste! Recycle devices,
accessories and packaging. Observe
applicable national regulations.
Information on REACH: www.festool.com/reach
).
English
13