Publicidad
General recomendation
• The bathtub or hidromassage should be covered with a protective film to prevent scratches and abuse during the remodeling work.
• The bathtub or hidromassage must be installed after all the was finished place and locative work in the bathroom is made.
•The bathtub with the pre leveled support base are high enough to allow easy access therefore it is not necessary an extra base to increase height.
• Check that the pre leveled support base has ALL legs. They should remain firmly seated on the floor.
• Check that the transparent hose 1/8" is connected to the switches of the pump and the button (see hydromassage specifications).
• Make sure there are no leaks in the hoses and the pump before finishing installation.
• Verify that the suction hose is tied and placed up so that the water is not going out and have leaks.
• When your hidromassage is installed outdoors, the motors should not be located in a place where they get wet.
• Do not relocate any of the hydromassage components and / or equipment.
• If your equipment has air massage equipment, remember to place the blower 5.9" away from the wall, otherwise it may suffer overheating.
• Before installing check that your product meets all required specifications in the purchase order. (Color, equipment location, number of accessories, etc.).
• To connect your equipments should not use extensions or multiple sockets.
ATENCIÓN:
no instale su hidromasaje sin la ayuda de un técnico especializado o de su asesor comercial firplak
tel: 4441771 (ext: 108).
ATTENTION:
do not install your hydromassage without the help of a specialized technician or your business advisor firplak tel: 4441771 (ext: 108).
Dirección: Autopista Sur Cll 29 # 41-15 Itagüí- Antioquia- Colombia
Fax: (574)281 76 07 apartado aéreo A.A. 53059 Medellín - Colombia
Email: servicioalcliente@firplak.com
Conmutador: (574) 444 17 71
Publicidad
