Bosch Purion BUI210 Instrucciones De Servicio página 12

Ocultar thumbs Ver también para Purion BUI210:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

English – 10​
Code
Cause
500
Internal fault in the drive unit
502
Bike light fault
503
Speed sensor fault
504
Manipulation of the speed sensor de-
tected.
510
Internal sensor fault
511
Internal fault in the drive unit
530
Battery fault
531
Configuration error
540
Temperature error
550
An unauthorized consumer has been
detected.
580
Software version error
591
Authentication error
592
Incompatible components
593
Configuration error
595, 596
Communication error
1 270 U020 XBP | (14.02.2019)
Corrective measures
Restart the system. If the problem persists, contact your
Bosch eBike dealer.
Check the light and the wiring connecting it. Restart the
system. If the problem persists, contact your Bosch eBike
dealer.
Restart the system. If the problem persists, contact your
Bosch eBike dealer.
Check the position of the spoke magnet and adjust it if re-
quired. Check for signs of manipulation (tuning). The assis-
tance of the drive is reduced.
Restart the system. If the problem persists, contact your
Bosch eBike dealer.
Restart the system. If the problem persists, contact your
Bosch eBike dealer.
Switch the eBike off, take the eBike battery out and put it
back in. Restart the system. If the problem persists, con-
tact your Bosch eBike dealer.
Restart the system. If the problem persists, contact your
Bosch eBike dealer.
The eBike is outside the tolerable temperature range.
Switch the eBike system off to let the drive unit cool down
or warm up to the tolerable temperature range. Restart the
system. If the problem persists, contact your Bosch eBike
dealer.
Remove the consumer. Restart the system. If the problem
persists, contact your Bosch eBike dealer.
Restart the system. If the problem persists, contact your
Bosch eBike dealer.
Switch the eBike system off. Take the battery out and put it
back in. Restart the system. If the problem persists, con-
tact your Bosch eBike dealer.
Use a compatible display. If the problem persists, contact
your Bosch eBike dealer.
Restart the system. If the problem persists, contact your
Bosch eBike dealer.
Check the wiring to the gearbox and restart the system. If
the problem persists, contact your Bosch eBike dealer.
Bosch eBike Systems

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Purion bui215

Tabla de contenido