AFG 7.3AU Manual Del Propietário página 20

7.3AU ASSEMBLY STEP 5
7.3AU
20
AFG14_7.3AR_AU_OM_r1_5.indd 20
19
12
11
20
18 17
21
* NOTE: There is no hardware for this step.
A Attach the RIGHT PEDAL (17) to the RIGHT
CRANK ARM (18), tightening it CLOCKWISE with
the provided 13mm/15mm flat wrench.
B Attach the LEFT PEDAL onto the LEFT CRANK
ARM, tightening it COUNTER-CLOCKWISE with
the provided 13mm/15mm flat wrench. (NOTE: The
left crank arm is reversed threaded so it is very
important that it is tightened counter-clockwise.
Tightening it the opposite way can damage the
pedal or the crank arm or both.)
C Connect the CONSOLE CABLES (12) and
carefully tuck them into the CONSOLE MAST (11).
D Attach the CONSOLE (19) to the CONSOLE
MAST (11) using the 4 PRE-ATTACHED SCREWS
(20) (The screws will have to be removed from the
console first).
E Plug in POWER ADAPTER (21) as shown.
7.3AU ASSEMBLY COMPLETE!
5/12/14 11:13 AM