WEBTEC RFIK Serie Instrucciones De Funcionamiento página 4

EU Specification
Model No.
RFIK30-B-6
RFIK60-B-6
RFIK120-B-6
RFIK200-B-6
Connections
By flexible hose (1/2 - 1 metre recommended length)
RFIK***-B-6: Inlet Port:
Outlet Port: 3/4" BSPP
Dimensions/Weight:
310 x 105 x 120 mm, 6.6 kg
US Specification
Model No.
RFIK30-S-6
RFIK60-S-6
RFIK120-S-6
RFIK200-S-6
Connections
By flexible hose (2 - 3 ft recommended length)
RFIK***-S-6: Inlet Port: 1-5/16" -12UN #16 SAE ORB
Outlet Port: 1-1/16" -12UN #12 SAE ORB
Dimensions/Weight:
12.25 x 4.125 x 4.875 inches, 14.5 lbs
Adapters are available to suit most applications. Consult sales office for details.
Connect the RFIK into the hydraulic system as required using two 1 - 2 metre (3 - 6 ft) long hoses. Ensure
that the flow you wish to measure is passing through the RFIK in the direction of the double-arrows on the
flow indicator dial. Flow is allowed in the direction of the single arrow, but this flow will not be measured.
Measurement and Indication
Flow
Measured by a tapered metering piston moving
within a fixed, sharp edged orifice designed to
minimise the effects of changes in temperature and
viscosity. The piston movement is proportional to
the change in flow rate. In reverse the piston moves
back to allow the flow to return at low pressure.
Accuracy: ± 4% of full flow over range 20 - 40 cSt.
Pressure Drop
At full flow with oil viscosity 28 centistokes.
Model Pressure Drop at Max. Flow
RFIK30 60 psi
RFIK60 76 psi
RFIK120 94 psi
RFIK200 218 psi
2
Specification
Flow Range Max. Working Pressure
2 - 30 lpm
5 - 60 lpm
5 - 120 lpm
10 - 200 lpm
1" BSPP
Flow Range Max. Working Pressure
0.5 - 8 US gpm
1 - 16 US gpm
1.3 - 32 US gpm
2.0 - 54 US gpm
420 bar
420 bar
420 bar
420 bar
Adapters
Adaptors are fitted as standard to provide inlet
& outlet connections
RFIK30-B-6: 3/4" BSPP Male
RFIK60-B-6: 3/4" BSPP Male
RFIK120-B-6: 1" BSPP Male
RFIK200-B-6: 1" BSPP Male
6000 psi
6000 psi
6000 psi
6000 psi
Adaptors
Adaptors are fitted as standard to provide inlet &
outlet connections
RFIK30-S-6: 1-1/16" -12UN JIC Male
RFIK60-S-6: 1-1/16" -12UN JIC Male
RFIK120-S-6: 1-5/16" -12UN JIC Male
RFIK120-S-6: 1-5/16" -12UN JIC Male
Pressure
Glycerine filled 63 mm (2 1/2") pressure gauge 0 -
420 bar (0 - 6000 psi) gives a continuous reading of
system pressure.
Accuracy: ± 1.6% of full scale
Temperature
For continuous use at fluid temperatures up to
80°C (180°F), for intermittent use for less than 10
minutes, at up to 110°C (230°F). Indicated in °C
and °F by a thermometer built into the flowblock to
measure temperature changes in the fluid passage.
Accuracy: ± 2.5°C (± 5°F)
Temperature Range
20 - 110 'C
20 - 110 'C
20 - 110 °C
20 - 110 °C
Temperature Range
65 - 230 'F
65 - 230 'F
65 - 230 °F
65 - 230 °F