To Store Your Accessories; Operation - RIDGID WD1250 Manual Del Propietário

Aspiradora para mojado/seco de 12 galones ee.uu./45 litros
Ocultar thumbs Ver también para WD1250:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

All manuals and user guides at all-guides.com
SP6663 12 GALLON.qxd
3/16/07

To Store Your Accessories

1. Slide extension wands and acces-
sories over the rings on the caster
feet.
2. To remove wands and accessories,
lightly rotate and pull upward.
3. Accessories may also be stored in the
rings provided on lid.

Operation

To reduce the risk of fire or explosion, do not operate this vac in areas with
flammable gases, vapors or explosive dust in the air. Flammable gases or
vapors include but are not limited to; lighter fluid, solvent type cleaners,
oil-base paints, gasoline, alcohol or aerosol sprays. Explosive dusts include
but are not limited to; coal, magnesium, aluminum, grain or gun powder.
Do not vacuum explosive dust, flammable or combustible liquids or hot
ashes. Do not use this vac as a sprayer. To reduce the risk of health hazards
from vapors or dusts, do not vacuum toxic materials.
!
WARNING: The operation of any
utility vac can result in foreign
objects being blown into the eyes,
which can result in severe eye
damage. Always wear safety
eyewear complying with ANSI Z87.1
(or in Canada, CSA Z94.3) before
starting operation. Safety eyewear
are available at many local retail
stores.
CAUTION: To reduce risk of
!
hearing damage, wear ear protectors
when using the vac for extended
hours or when using in a noisy area.
8:57 AM
Page 7
Car Nozzle
Utility Nozzle
WARNING
!
To reduce the risk of electric shock, this
appliance has a polarized plug (one
blade is wider than the other). This plug
will fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician to install the
proper outlet. Do not change the plug in
any way.
After you plug the power cord into the
outlet, turn the unit on by pushing the
switch from position "O" to position "l". The
symbols used on the switch actuator are
international "On & Off" symbols. "O" is the
symbol for "OFF" and "l" is the symbol for
"ON".
= OFF
7
= ON

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido