How To Install Your Canopy Housing; How To Assemble Your Ceiling Fan Blades - Fanimation KINDRED Manual Del Usuario

NOTE: This step is applicable after the neccessary wiring is completed.
1. Assemble canopy by rotating key slot in canopy over
shoulder screw in hanger bracket
the wires. Tighten shoulder screw. Fully assemble and
tighten second shoulder screw that was previously
removed. (Figure 1)
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the canopy
housing and not pinched between the housing and the
ceiling.
2. Securely attach and tighten the canopy screw cover
over the shoulder screws in the hanger bracket utilizing
the keyslot twist-lock feature. (Figure 2)

How to Assemble Your Ceiling Fan Blades

1. Assemble the blade to the blade support with the
serrated head screws and blade plates. Make sure
that the blades are fully seated against the blade
supports and tighten screws. (Figure 1)
and care not to pinch
WARNING
Blade Support
Blade Plate
HARDWARE USED:
Serrated Head
Screw
13
Ceiling Canopy
Figure 1
Canopy Screw
Cover
Figure 2
Blade
Figure 1
x 36
Screw