Special Instructions - Whittier Wood Furniture Melina 863Wb Instrucciones Para Armar

863Wb Melina Bench — Parts List
BEFORE BEGINNING ASSEMBLY, check that the quantities of the parts received match those on the parts list.
Ab — Leg — Qty. 4 Bb — Top Assembly
— Qty. 1
C — 7x50mm Hex Screw— Qty. 8 D — Hex Wrench— Qty. 1

SPECIAL INSTRUCTIONS

I f a top or panel should become cupped, do not be alarmed. The panel was fl at when it was
manufactured. It is a natural characteristic of wood in an unfi nished state to cup
from uneven moisture conditions. The fi gure at the right shows an exaggerated
view of what could happen. This only means that the convex side has
absorbed moisture, or the concave side has dried out.
Usually a cupped panel will equalize and straighten out if both sides are
exposed to similar conditions for a day or so.
863Wb – Page 2 – 06/08