Manual - JVC HR-J3006UM Manual De Instrucciones

SELECT TIME ZONE
8
You can select the time zone automatically or manually.
Move the highlight bar to "TIME ZONE" by pressing OK
, then press CH 5 ∞ or PUSH JOG%fi
or PUSH JOG
to select "AUTO" or the desired time zone.
AUTO
HAWAII
ALASKA
PACIFIC
NOTE:
If an incorrect time is displayed by the Plug & Play
function, you may be receiving the clock setting data of
a PBS channel from an adjacent time zone or from an
incorrect PBS channel from a cable TV system. If you
selected "AUTO" for the host channel in step 6, be sure
to select the correct time zone manually.
RETURN TO NORMAL
SCREEN
9
Press MENU.
IMPORTANT
Turn the VCR off after performing the Semi-Auto Clock Set
procedure. "Auto" will appear on the front display panel when
the clock is being set. The current time will appear
automatically when the clock is set.
ATLANTIC
EASTERN
CENTRAL
MOUNTAIN

Manual

SET TIME
5
Press CH 5 ∞ or PUSH
JOG % fi until the desired
time appears, then press
OK or PUSH JOG
Press and hold CH 5 ∞
or PUSH JOG%fi to
change the time by 30
minutes.
When the time is
entered manually, "AUTO CLOCK" will be automati-
cally set to "OFF", and "HOST CH" and "TIME ZONE"
will disappear.
SET DATE
6
Press CH 5 ∞ or PUSH JOG % fi until the desired date
appears, then press OK or PUSH JOG
Press and hold CH 5 ∞ or PUSH JOG % fi to change
the date by 15 days.
SET YEAR
7
Press CH 5 ∞ or PUSH JOG% fi until the desired year
appears, then press OK or PUSH JOG
SELECT D.S.T. MODE
8
Press CH 5 ∞ or PUSH JOG % fi to select the desired
mode.
a– Set to "ON" so that the adjustment to your VCR's
clock will be made on the clock itself.
b– Set to "OFF" if Daylight Saving Time does not apply
to you.
START CLOCK
9
Press MENU and normal screen appears.
To Make Corrections
Press OK or PUSH JOG
blinks, then press CH 5 ∞ or PUSH JOG % fi.
If you are using this VCR in a location other than in the
U.S.A.:
When the VCR's memory backup expires because of a power
failure, the VCR's front display panel shows either an incorrect
time or "– –:– –". If this happens, perform manual clock setting
to adjust the clock.
EN
CLOCK SET
TIME DATE
. – –:– –AM 1/ 1
AUTO CLOCK : ON
HOST CH : AUTO (CATV)
D.S.T. : AUTO
TIME ZONE : AUTO
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
.
twice.
until the item you want to change
11
YEAR
99