Recording Features; Record One Program While Watching Another; Display Elapsed Recording Time - JVC HR-J3006UM Manual De Instrucciones

Recording
Features
TV/VCR
C.RESET
••
3
1
1 2 3
2
4 5 6
7 8 9
0
4
••
Record One Program While
Watching Another
ENGAGE TV MODE
1
During recording...
Press TV/VCR. The VCR's VCR indicator goes out. (If
you are using the RF connection (
the output from your VCR, the TV broadcast being
recorded disappears.)
If you are using the AV connection (
the output from your VCR, change the TV's input
mode from AV to TV.
SELECT CHANNEL FOR
VIEWING
2
Use the TV's channel selector to set the channel you
want to watch.
Display Elapsed Recording
Time
RESET COUNTER TO ZERO
1
Before recording starts, press C.RESET. The counter
resets to zero and displays the exact elapsed time as the
tape runs.
DISPLAY ELAPSED TIME ON
SCREEN
2
During recording, press OSD at any time to see the
elapsed time.
All indications corresponding to the current status of the
VCR are displayed for 5 seconds. The counter display
remains on the screen indicating the elapsed time.
Press OSD again to remove the display.
Make sure "SUPERIMPOSE" is set to "ON" (
The indications are not recorded.
Each time you press OSD, the indication on the front
display panel will also change as follows: counter
reading = channel number = clock time. (Channel
number is not displayed during playback.)
21
EN
pg. 4) to view
pg. 4) to view
pg. 20).