Power Tool Use And Care; Battery Tool Use And Care; Service; Drill Safety Warnings - Powerworks XB20V Manual Del Operador

2.4

POWER TOOL USE AND CARE

• Do not force the power tool. Use the correct power
tool for your application.
do the job better and safer at the rate for which it
was designed.
• Do not use the power tool if the switch does not turn
Any power tool that cannot be
it on and off.
controlled with the switch is dangerous and must be
repaired.
• Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
Such preventive safety measures
power tools.
reduce the risk of starting the power tool
accidentally.
• Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
• Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's
operation. If damaged, have the power tool repaired
Many accidents are caused by poorly
before use.
maintained power tools.
• Keep cutting tools sharp and clean.
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into
account the working conditions and the work to be
Use of the power tool for operations
performed.
different from those intended could result in a
hazardous situation.
2.5

BATTERY TOOL USE AND CARE

• Recharge only with the charger specified by the
A charger that is suitable for one type
manufacturer.
of battery pack may create a risk of fire when used
with another battery pack.
• Use power tools only with specifically designated
Use of any other battery packs may
battery packs.
create a risk of injury and fire.
• When battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys,
nails, screws, or other small metal objects that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or fire.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with plenty of soap and
water. If liquid contacts eyes, immediately seek
Liquid ejected from the battery may
medical help.
cause irritation or burns.
English
The correct power tool will
Properly
2.6

SERVICE

• Have your power tool serviced by a qualified repair
person using only identical replacement parts.
will ensure that the safety of the power tool is
maintained.
3

DRILL SAFETY WARNINGS

Hold the power tool by insulated gripping surfaces only,
because the saw chain many contact hidden wiring.
Saw chains contacting a "live" wire may make exposed
metal parts of the power tool "live" and could give the
operator an electric shock.
• Before any work on the machine (e.g., maintenance,
tool change, etc.) as well as during transport and
storage, set the rotational direction switch to the
centre position. Unintentional actuation of the On/Off
switch can lead to injuries.
• The battery is supplied partially charged. To ensure
full battery capacity, completely charge the battery
in the battery charger before using for the first time.
• Read the operating instructions of the battery
charger.
• Apply the power tool to the screw/nut only when it is
switched off. Rotating tool inserts can slip off.
• When working with an application tool, pay attention
that the application tool is firmly seated on the tool
holder. When the application tool is not firmly
connected with the tool holder, it can come loose
again and not be controlled.
• The torque depends on the impact duration. The
maximum achieved torque results from the sum of
all individual torques achieved through impact.
• Check the actually reached torque with a torque
wrench.
• To save energy, only switch the power tool on when
using it.
4

SYMBOLS ON THE PRODUCT

Some of the following symbols may be used on this tool.
Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate
the tool better and safer.
Symbol Explanation
Read all safety warnings and all in-
structions
Wear ear protection
Low speed
5
EN
This