Stop The Machine; Adjust The Variable Speed; Adjust The Two-Speed Gear Train; Adjust The Reversing Button - Powerworks XB20V Manual Del Operador

EN
7.2

STOP THE MACHINE

1. Release the switch trigge to turn the machine OFF
(O).
Release the switch trigger and let the coupler to come
to a complete stop.
7.3

ADJUST THE VARIABLE SPEED

1. Increase the trigger pressure to make a higher
speed.
2. Decrease the trigger pressure to make a lower
speed.
7.4 ADJUST THE TWO-SPEED GEAR
TRAIN
The machine has a two-speed gear train designed for
drilling or driving at LO (1) or HI (2) speeds. A slide
switch is on top of the machine.
1. When you use the machine in the LO (1) speed, the
speed decreases and the machine has more power
and torque.
2. When you use the machine in the HI (2) speed, the
speed increases and the machine has less power
and torque.
WARNING
English
Use LO (1) speed for high power and torque
applications and HI (2) speed for fast drilling or driving
applications.
7.5 ADJUST THE REVERSING
BUTTON
The machine has the reversing button (forward/reverse
lock) above the switch trigger to chang the direction of
the bit.
1. When the reversing button is on the left side of the
switch trigger, the bit direciton is forward.
2. When the reversing button is on the right side of the
switch trigger, the bit direction is reversible.
3. Put the direction button in the OFF (center lock)
position to help decrease the possibility of
accidental start when not operate.
Release the switch trigger and let the chuck to come
to a complete stop to stop the mahcine.
Let the chuck to come to a complete stop before
changing the direction of rotation.
8
WARNING
WARNING
WARNING