Descargar Imprimir esta página

WamBlee W420 Manual Del Usuario página 41

Ocultar thumbs Ver también para W420:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 13
During this stage, your device W420(LP/EX) will transmit in the VHF band
allocated to service international shipping a series of AIS SART ALERT
messages.
Manual activation
Should your W420(LP/EX) Personal AIS Beacon fail to activate automatically
you can proceed with manual activation. After checking that the knob (1) is
in the 'ARMED' position, press the 'Test/Activation' pushbutton (5). Once
pressed your W420 Personal AIS Beacon device will be activated with the
same way as it is in automatic mode.
EN
Deactivation
To deactivate your W420(LP/EX) Personal AIS Beacon it is necessary to rotate
the knob (1) clockwise, repositioning it to 'OFF'.
Press the pushbutton (2) inwards to release the safety lock and then,
continuing to hold the pushbutton down, rotate the knob clockwise until the
'OFF' position is reached, then release the pushbutton (2).
The device will be deactivated and stop emitting radio signals.
Periodic checks
Your W420(LP/EX) Personal AIS Beacon has been designed and built using the
very latest technology to ensure maximum performance and simplicity of
use. As with operation of the unit, periodic maintenance procedures are
designed to be simple and fast.
One of the most important things that needs checking periodically is the
battery charge.
There are two kinds of tests, a SHORT test that consists in checking battery
state and a LONG test that checks the operation of the GPS module. It is
recommended to carry out a SHORT test once a month, and the LONG test is
recommended on a yearly basis.
The execution of tests over the recommended schedule reduces the life time
of the batteries.
41

Publicidad

loading

Este manual también es adecuado para:

W420ex