Troy-Bilt 020242 Instrucciones De Uso página 16

Section 5: Maintenance
3. Tik pressurewasher to drainoilintoan approved
containeruntil i tdripsslowlyfrom pump.
4. Tik pressurewasher inoppositedirection a nd empty
prerneasuredpump oilbottle intosame opening (a
smallfunnelmay be helpful).
5. Install bDck pump oil cap and tighten firmly.
6. Set pressure washer in upright position.Add fuel and
engine oil
ENGINE MAINTENANCE
See the engine owner's manual for instructions on how to
properly maintain the engine.
_i_ CAUTION
i
Used motor oil has been shown to cause skin cancer in
certain laboratory animals.
Thoroughly wash exposed areas with soap and water:
KEEP OUT OF REACH OF CHILDREN. DON'T
POLLUTE CONSERVE RESOURCES. RETURN
USED OILTO COLLECTION CENTERS.
D ata Tag
Data tag information is very important if you need help from
our Customer Service Department or an authorized service
dealen
° The data tag (Figure 21) is located on the base of the
pressure washer. For future reference, please copy the
model revision, and serial number of the pressure washer
in the space below.
MODEL [
REV NO [
SERIAL [
Copy Hodel
]_'_ Number Here
]_ Copy Revision
Here
Copy Serial
Number Here
PSI
[
GPM [
0 LT