Sound Adjustments; Adjusting The Sound - JVC KD-SX980 Manual De Instrucciones

Adjusting the sound

You can adjust the sound characteristics to your
preference.
1
Select the item you want to adjust.
Each time you press the
button, the adjustable items
change as follows:
BAS
(bass) (treble)
VOL LOUD
(volume)
(loudness)
Indication To do:
BAS Adjust the bass.
TRE Adjust the treble.
FAD* Adjust the front
and rear speaker
balance.
BAL Adjust the left
and right speaker
balance.
LOUD Boost low and high
frequencies to
produce a well-
balanced sound
at low volume
level.
VOL Adjust the volume. 00 (min.)
* If you are using a two-speaker system, set the
fader level to "00."

SOUND ADJUSTMENTS

TRE FAD
(fader)
BAL
(balance)
Range
–06 (min.)
|
+06 (max.)
–06 (min.)
|
+06 (max.)
R06 (Rear only)
|
F06 (Front only)
L06 (Left only)
|
R06 (Right only)
LOUD ON
|
LOUD OFF
|
50 (max.)
2
Adjust the level.
To decrease the level.
Equalization pattern changes as
you adjust the bass or treble.
Ex.: When you adjust "TRE"
Note:
Normally the control dial works for volume
adjustment. So you do not have to select "VOL" to
adjust the volume level.
To increase the level.
21