Adjustment Options - Alcad MVB-002 Manual De Usuario

ENG - 10 DIGITAL VIDEODOOR ENTRY SYSTEM MONITOR
TURNING ON THE AUTO SWITCH-ON SYSTEM
Push the auto switch-on button (7). You can see the image captured by the video unit in the
entrance panel, open the door and communicate with the entrance panel by simply picking
up the handset of the monitor.
If some monitor is activated, the system indicator (4) will start blinking when pressing the
auto-switch button and the auto switch-on function will not operate. I f the handset is picked
up, busy tones will be heard . In this event wait until the system becomes free.
Time of
Time of
auto switch-on
auto switch-on:
Maximum time limit:
60 seconds
30 seconds
Time of
Time of
auto switch-on
auto switch-on:
Maximum time limit:
Flat
Consult your installer
Consult your installer
Auto switch-on
The calls from the entrance panel have priority over the auto switch-on system. If a call is
made from the entrance panel during the time of auto switch-on, the video of your monitor
will switch off, and the monitor will change to stand by status automatically, ensuring the
privacy of the call.

ADJUSTMENT OPTIONS

ADJUSTING THE CONTRAST AND BRILLIANCE OF THE IMAGE
The characteristics of brilliance and contrast of the image can be adjusted from the
monitor. To do so, simply adjust the controls (9) and (10) of the monitor.
HOW TO TURN THE VIDEO SYSTEM OFF
Turn the video ON/OFF switch of the monitor (8) to the right position. The indicator of
the status of the system will turn off. In the OFF position you can receive calls from the
street but you will not be able to see the image of the person who is calling. The auto
switch-on function is also disabled.