Fellowes Metal 100r Manual De Instrucciones página 6

ENGLISH
Powered Inserted Roller
Back margin adjustment
Adjustable edge guide
CAPABILITIES
Punching Capacity
80gsm
Transparent covers
100-200 micron
Up to 700 micron
Other standard covers
160-250gsm
Up to 300gsm
Up to 800gsm
Binding Capacity
Max binding coil size
Max document (80gsm) approx. 450 sheets
Technical Data
IMPORTANT SAFETY INSTRUCTIONS
Please read before use and keep for future
reference.
When punching;
- always ensure the machine is on a stable surface
- test punch scrap sheets and set the machine before punching final
documents
- remove staples and other metal articles prior to punching
- never exceed the machines quoted performance
Keep the machine away from heat and water sources.
Never attempt to open or otherwise repair the machine.
Plug the machine into an easily accessible socket.
Turn off the machine after each use.
Unplug the machine when not in use for an extended period.
11
Metal100R_409587_RevB_3L_041317.indd 11-12
Inserting roller on/off button
Waste tray
Metal coil diameter selector
Paper dimensions
Punching holes
20 sheets
Slot pitch
Adjustable edge guide
2 sheets
Voltage: 220-240V AC 50/60Hz
1 sheet
Current:
Net weight
3 sheets
Dimensions (LxDxH) 400 x 390 x 450 mm
2 sheets
1 sheet
50mm
Need Help?
Let our experts help you with a solution.
www.fellowes.com
Customer Service...
Always call Fellowes before contacting your place of purchase (see the
rear cover for contact details).
Punching handle
COIL DIAMETER & DOCUMENT SIZES
Metal coil diameter sizes
To select the correct size metal coil for a document use the document measure card, stored in the storage tray.
SET UP
A4
59
5.08mm
yes- rotary
0.25 Amps
9,6 kg
BEFORE YOU BIND
1
Select the correct coil diameter to
suit the document.
Tabla Orientativa de Medición
1 2
Ensure the machine is on a Check the waste tray is empty
stable surface. and correctly fitted.
2
Test punch scrap sheets to check
edge guide setting.
Guia de medidas
Document Measure
3
Adjustable back-stop margin feature.
Set the guide to suit the back margin
size required (2,3,4 or 5mm) Eg: 2mm
suits small documents (2-50 sheets),
5mm suits the largest documents (200-
450 sheets)
12
4/13/17 3:04 PM