Technical Information - Hergom E-20 N Instrucciones Para La Instalación, Uso Y Mantenimiento

Standard stove built in accordance with the specifications of regulation UNE-EN
13240:2002 "Solid fuel stoves – Requirements and methods of testing", amended by
UNE-EN 13240/AC and UNE-EN 13240:2002/A2.
Especificaciones de la estufa HERGÓM mod. E-20 N y E-21 N
Maximum power
Flue gas temperature
Average temperature at flue ring
Mass flow rate of smoke
Emisión of combustión products related to 13% O2
Efficiency
Recommended load
Recommended load range
Admits logs of wood of length:
Front Door
Smoke Adjusting Ring
Metal Chimney
Recommended Chimney heigth
Brickwork Chimney. Estimated minimum measurements
Recommended draught
Smoke exit
Primary air control
Secundary air supply
Weight
For others heights contact the supplier or Manufacturer (Estimate values)
WARNING! Your heater should not be used as an incinerator and no other type of fuel
should be used (plastic, chipboard...). Use recommended materials only.
Do not use as fuel wood from the sea; salts contained in it react in the combustion
releasing acids that damage the cast iron and the steel plate.
E-20 N / 21 N STOVE
2.6 – TECHNICAL INFORMATION
WOOD (Oak, beech, etc.)
Heigth
Width
580
420
330
42
8,5 KW
279 ºC
311 ºC
8.5 gr/sec
0,17 vol%
75%
1.7Kg.
45 Minutes
420 mm.
400mm.
450 mm.
150 mm.
150 mm.
5 a 6 metros
175 x 175 mm.
12.8 Pascal
Vertical / Horizontal
Regulación manual
Sistema Venturi
90 Kg.
415
400
145 255