Technical Characteristics; Maintenance And Cleaning - Mestra R-080024 Manual De Instrucciones

English
OPERATION
Time
Power level
Frecuency
Start / stop
Press the main switch placed in the back side.
Pressing upper button, set the vibration time (30'', 1',
1'30'', 2'' or indefinitely).
Pressing médium button, set the vibration power. We
recommend start by the lower power. You can vary
the power while unit is running.
Pressing the lower button, set the vibration mode.
There are 4 vibration modes, plus a fifth one that
automatically alternates from one to another. You can
also vary the vibration mode while the unit is running.
Press the START/STOP
vibration.
Después de cierto tiempo, la mezcla quedará
correctamente compactada.
After a short time, once the mixture is properly
compacted, switch the unit off using the
START/STOP button.
When not using the vibrator for a while, disconnect it
from the network acting on the rear main switch.
After putting the main switch off, last used parameters
will remain in memory.

MAINTENANCE AND CLEANING

To ensure a long, trouble-free service life and
performance of the unit, we recommend as follows:
After using the unit, always clean away any splashes
of mixture before they dry.
As a precaution, always disconnect the unit from the
mains before cleaning it.
Regularly check the suction caps (E).
Use only original spare parts supplied by the
manufacturer.
button to start the
PRECAUTIONS
Before connecting the unit to the power source, make
sure the voltage is correct (grounded 230 V, 50/60
Hz).
The cable may only be replaced by one with the same
characteristics as supplied by the manufacturer. Do
not use the unit in wet places or close to heat sources.
Do not place easily broken containers or other objects
on the vibration platform.
Do not allow children or unskilled personnel to
handle the unit.
Do not pull, twist or bend the mains cable
excessively.
Before cleaning the unit, ensure that it is unplugged.
Never immerse the unit in liquid when cleaning it.
Do not place hot containers or objects on the
vibration platform, as this may damage the rubber.
Do not remove the vibration platform cover.

TECHNICAL CHARACTERISTICS

Power supply:
Dimensions:
Consumption:
Fuse:
Sound power:
Weight:
Vibrations p. m.:
230 V, 50/60 Hz
197 x 265 x 227 mm
240 W
Glass 9 A, 110-240 V
< 70 dBA
5,5 kg
3000/6000