Engine Oil Change - Husqvarna W 50P Manual De Usuario

MAINTENANCE

ENGINE OIL CHANGE

Drain the used oil while the engine is warm. Warm oil drains quickly and
completely.
Place a suitable container below the engine to catch the used oil, and
1.
then remove the oil filler cap/dipstick, drain plug and sealing washer.
Allow the used oil to drain completely into an approved container,
2.
then reinstall the drain plug with a new sealing washer, and tighter it
securely.
With the engine in a level position, fill to the edge of the oil filler hole
3.
with the recommended oil (see page 31).
Engine oil capacities
W 50P 0.60 L
W 80P 0.60 L
NOTICE
Improper disposal of engine oil can be harmful to the environment. If
you change your own oil, please dispose of used motor oil properly.
Put it in a sealed container, and take it a recycling center. Do not
throw it in the trash, pour it on the ground, or pour it down adrain.
Screw in the oil filler cap dipstick securely.
4.
30
DRAIN PLUG
OIL FILLER CAP/DIPSTICK
SEALING WASHER