Publicidad
Idiomas disponibles
Idiomas disponibles
SlimPAR PRO H USB QRG
EN
The SlimPAR PRO H USB is a heavy-duty, hex-color LED Par with a low
Product
profile. Built-in infrared technology offers easily controllable static colors and
Description
automated programs with the optional IRC-6 remote. DMX control wirelessly
with the convenient built in D-Fi USB port. Twelve high-power, hex-color
LEDs nearly eliminate multicolored shadows and the smooth and even output
makes it perfect for frontlight applications.
Bracket Adjustment Knob
Menu Buttons
LED Display
Microphone
Fuse holder
Power Out
Product
Description
Power In
DMX In/Out
Safety Cable
D-Fi USB Port
Pass-Through
Mounting Brackets
WARNING! DO NOT plug anything other than a D-Fi USB into the USB
port. Doing so may cause damage to the product.
This product has an auto-ranging power supply that can work with an input
AC Power
voltage range of 100–240 VAC, 50/60 Hz.
To eliminate unnecessary wear and improve its lifespan, during periods
of non-use completely disconnect the product via breaker or by
unplugging it.
Power Linking
For the maximum number of SlimPAR PRO H USB products that you can
power link at each voltage, see the User Manual or the sticker on the product.
1. Disconnect the product from power.
Fuse
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
Replacement
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
3
Publicidad
