English
- Do not touch the unit or the power cord with wet hands.
- Unplug the unit in case of storm and when you are not going to use it for a long time.
- Place the unit in a dry place, away from dust and water splashes.
- Do not pull, twist or fold the power cord excessively.
- Do not wet the unit; do not use chemical products to clean it.
- WARNING: to prevent electric shock hazards, connect the unit to a proper power
source (grounded 230 V, 50/60 Hz).
- Do not touch the wax tank during operation; it is very hot.
- To prevent burns, be cautious when handling the heater even when it is empty.
- Always keep the lid closed when you don't use the unit.
- After turning the main switch off, wait for 20 minutes before touching the bowls.
- Do not spill wax while removing it from the heater. The wax is very hot and it could
cause small burns.
- The machine features a precision circuit. Prevent fortuitous impacts and stresses that
could cause mechanical damage.
- Do not obstruct the ventilation grilles at the bottom of the unit.
- Remove any dirt or water remains from the cord connection.
- Unplug the unit immediately whenever you notice an unusual noise, smell or smoke.
- Do not insert plastic objects into the bowls or any other material that melts at low
temperatures.
- Do not use the unit in damp rooms or near inflammable materials (alcohol,
solvents,...).
- Do not allow children or non-qualified personnel ha ndling the unit.
- Choose a flat and firm surface to place the unit, away from heat or vibration sources.
- Contact the supplier for questions or detailed information about problems with the unit.
GB
WARNINGS – PREVENTIVE MEASURES