Glacier bay HD67817W-6001 Manual Del Usuario página 6

Installation (continued)
5
Installing the stopper and
horizontal rod
□
Before installation, unscrew the protective cap
(1) from the horizontal rod (P).
□
Insert the stopper (J) into the drain hole in the
sink.
□
Insert the horizontal rod (P) into the drain body
(N) and through the hole of the stopper (J) until
you hear a click. See insert 2. You can press the
two sides of the joint (O) to remove the horizontal
rod (P).
NOTE: For easier removal and cleaning, rotate the stopper
(J) 90 degrees so that the horizontal rod (P) does not go
through the hole in the stopper (J). See insert 3.
1
Insert 3
N
J
2
P
N
Insert 2
O
O
6
Installing the lift rod
□
Slide the lift rod (S) down into the lift rod
strap (Q) through the faucet (A) until it clicks
into the lift rod strap (Q).
NOTE: If a shorter lift rod (S) is required for your
installation, you may call Glacier Bay Customer Service
for assistance.
A
P
6
S
S
2
S
Q
Q