M-system MFT 96 Serie Instrucciones De Uso página 230

BURNERS
They can be removed and washed with
soapy water only.
They will remain always perfect if
cleaned with products used for silver-
ware.
After cleaning or wash, check that burn-
er-caps and burner-heads are dry
before placing them in the respective
housings.
Note: To avoid damage to the electric
ignition do not use it when the burn-
ers are not in place.
C
F
Fig. 6.1
230
T
S
CORRECT REPLACEMENT OF THE
BURNERS
It is very important to check that the
burner flame distributor F and the cap C
has been correctly positioned (see figs.
6.1-6.2) - failure to do so can cause
serious problems.
Check that the electrode "S" (figs. 6.1 -
6.3) is always clean to ensure trouble-
free sparking.
Check that the probe "T" (figs. 6.1 - 6.3)
next to each burner is always clean to
ensure correct operation of the safety
valves.
Both the probe and ignition plug must
be very carefully cleaned.
Fig. 6.2