M-system MFT 96 Serie Instrucciones De Uso página 244

BACKGUARD
Before installing the cooker, assemble the backguard "C" (fig. 7.2).
– The backguard "C" can be found packed at the rear of the cooker.
– Before assembling remove any protective film/adhesive tape.
– Remove the two spacers "A" and the screw "B" from the rear of the cooktop.
– Assemble the backguard as shown in figure 7.2 and fix it by screwing the central
screw "B" and the spacers "A".
C
B
A
Fig. 7.2
244