Trim Trap; Free-Arm Sewing (Removing Bed Extension) - Brother 884-B02 Manual De Instrucciones

Trim trap

The optional trim trap <A> holds the trimmed fabric
and thread produced when sewing.
<A>
To install:
Insert the trim trap <A> until it contacts the front
cover.
NOTE:
Be sure to position the positioning guide <B> to
the one on the machine.
To remove:
Slowly pull out the trim trap.
NOTE:
The optional trim trap can also be used as the foot
controller holder.
CAUTION
Always remove the foot controller from the trim
trap when carrying the machine.
<B>

Free-arm sewing (removing bed extension)

Free-arm sewing enables tubular pieces to be
sewn more easily.
1. Remove the bed extension <A>.
<A>
NOTE:
Be careful not to lose the removed bed
extension.
2. Position the fabric, and start sewing. (See
CHAPTER 5.)
7