Important Safety Instructions; Mounting Bracket - Spectro-UV SPECTROLINE EDGE 13 Manual Del Operador

The EDGE™ 13 Series UV-A LED flood lamps must be used with a properly
grounded outlet. Please read the instructions in this manual carefully
before using the unit. Never use the equipment in any manner not
specified in these instructions. The lamp is completely safe when used as
directed (see MOUNTING INSTRUCTIONS FOR SAFE OPERATION).
We recommend using Spectroline
See REPLACEMENT PARTS AND ACCESSORIES for model numbers.
The available eye and facewear also improves the contrast between the
fluorescent area and the background.
The operator should stand away from the UV beam and not in a direct line
of sight. NOTE: No UV light should be seen on clothing or body parts.
UV reflection on clothing means the operator must move outside of the UV
beam. For maximum personal safety, we recommend using either the
Spectroline
spectacles.
NOTE: Be sure to use genuine EDGE™ 13 replacement parts.
Using another manufacturer's replacement parts could affect product
performance and will void the lamp warranty.
NOTE: Should the unit's internal temperature become too hot, the unit will
automatically shut down to avoid internal damage or deter use operating
outside of compliance (EDG-13SBLC ONLY). In this event, allow time for
the unit to cool. The unit will power back on when within a safe operating
temperature.
MOUNTING INSTRUCTIONS FOR SAFE OPERATION
Secure two eyebolts to the mounting bracket. Attach one metal chain link to each
of the eyebolts (not supplied). You may also affix the unit to any location utilizing
the mounting bracket and bolts. Assure the anchor you are utilizing is secure and
can safely hold the weight of the unit.

IMPORTANT SAFETY INSTRUCTIONS

UVF-80 face shield, UVG-50 goggles or RP-UVS-30
®
UV-absorbing protective eye and facewear.
®
3

Mounting Bracket

Adjustment Bolt