USAG 928 AC1 1/2 Manual De Uso E Instrucciones página 9

FORWARD/REVERSE AND SPEED CONTROL KNOB
The forward/reverse and speed control knob (Fig. 1) determines the
direction of the tool and also serves as the variable speed control. To
select forward rotation, depress the side button on the right side of
the tool as shown. To select reverse, depress the side button on the
left side of the tool as shown.
Fig. 2
PROPER HAND POSITION
Warning: To reduce the risk of serious personal injury, ALWAYS use proper hand position as shown
(fig.3).
Warning: To reduce the risk of serious personal injury, ALWAYS hold securely in anticipation of a
sudden reaction.
LUBRICATION/GREASING
The pneumatic tool must be connected to a filter-lubricator unit (we recommend USAG item 930) provided with an air-oil microfog
mixer, set at two drops per minute. This will result in a high-performing tool and wear-resistant mechanical parts.
If lubrication is not provided to the line, oil ISO 32 must be periodically poured into the pneumatic tool, through the air supply hole.
MAINTENANCE
Maintenance and repair jobs must be carried out by trained personnel. For such jobs, you can contact USAG's repair centre.
DISPOSAL
The pneumatic tool, accessories and packaging should be sent to a waste disposal centre, in accordance with the laws in force in your
country.
WARRANTY
This tool is manufactured and tested in accordance with current EU regulations, and is covered by a 12-month warranty for professio-
nal use or a 24-month warranty for nonprofessional use.
We will repair any breakdowns caused by material or manufacturing defects by fixing the defective pieces or replacing them at our
discretion. Should assistance be required once or several times during the warranty period, the expiry date of this warranty will remain
unchanged. This warranty will not cover defects due to wear, misuse or breakdowns caused by blows and/or falls. In addition, this
warranty will no longer be valid if any changes are made, or if the pneumatic tool is forced or sent to the customer service in pieces.
This warranty explicitly excludes any damage to people and/or things, whether direct or consequential.
WE, STANLEY BLACK & DECKER ITALIA S.R.L. VIA VOLTA, 3 - 21020 MONVALLE (VA) ITALY, DECLARE UNDER OUR OWN
RESPONSIBILITY THAT THE USAG PRODUCT 928 AC1 1/2 - ALUMINIUM IMPACT WRENCH - IS IN CONFORMITY WITH THE
«MACHINERY» DIRECTIVE 2006/42/EC
- AND IS IN CONFORMITY WITH THE PROVISIONS OF THE HARMONISED EUROPEAN STANDARD EN ISO 11148-6: 2012
THE UNDERSIGNED IS RESPONSIBLE FOR COMPILATION OF THE TECHNICAL FILE AND MAKES THIS DECLARATION ON BEHALF
OF USAG.
Forward rotation can be adjusted for variable speed by turning the button from low to high as shown.
For maximum forward torque (Fig. 2), turn knob until the indicator line matches with '+' symbol. For low
forward torque turn knob until the indicator line matches '-' symbol.
EC DECLARATION OF CONFORMITY
FORWARD
Fig. 1
Fig. 3
25.04.2017
Director Engineering
REVERSE