EN
Menu Options
Main Level
ADDRESS
PERSON
SETTINGS
Programming Levels
001~512
PERSON 1
PERSON 2
PT SPEED
PAN INV
TILT INV
OP SPEED
BLACK D
DIMMER
PERFORM
DIM INV
DMXERROR
DMXRESET
DISPLAY
KEY LOCK
HOMEPAGE
P.START
P.END
RANGE
T.START
T.END
DEFAULT
SEND
Selects a starting DMX address
Selects the 14-channel DMX mode
Selects the 11-channel DMX mode
FAST
Defines the pan/tilt speed
SLOW
NORM
Defines the direction of pan function
INVERT
NORM
Defines the direction of tilt function
INVERT
FAST
Defines the optics speed
SLOW
INSTANT
Defines the move-in black delay
DELAY
DIM4
DIM3
Slow (DIM4) to fast (DIM1) dimmer curves
DIM2
DIM1
OFF
Linear dimmer
NORM
Defines the direction of the dimmer
INVERT
function
SAVE
Save the last look when DMX signal is lost
BLACK
All LEDs off when DMX signal is lost
DMX
The DMX controller can reset the fixture
DISPLAY
The control panel can reset the fixture
LONG
Defines the amount of time the display
SHORT
backlight is on
ALWAYS
YES
Activates the control panel password
NO
Sets the display to show only the DMX
DMX
channel when idle
Display what is programmed via
NAME+DMX
COMMAND level when idle
Sets the pan start point (restricted range)
Sets the pan end point (restricted range)
000~255
Sets the tilt start point (restricted range)
Sets the tilt end point (restricted range)
NO
Sets unit back to default factory settings
YES
Sends all settings of this product to all
YES
other Q-Spot™ 360 LED products
NO
connected via master/slave
5
Q-Spot™ 360 LED QRG
Description