Battery Replacement; Technical Data - Ewbank CFP500 Manual De Instrucciones

Battery replacement

Push Switch (4) off first and open the battery cover by
sliding the cover in an upwards direction.
Unplug battery lead gently from the socket and
remove battery pack.
Please dispose of batteries responsibly at a recycling facility.
Insert the new battery connector into the socket adjacent to the battery pack and replace the battery
compartment cover.

Technical data

Operating time with full battery charge (depending on floor covering) - up to 40 minutes
Charging time with empty battery - typically 4 hours
Battery Voltage/ Capacity - 6V/1000mAH
Charger Model/Outlet - SW-072025/ 7.2V 200mA
Voltage/Frequency (Charger) - 100-240V AC 50/60Hz
Rated Consumption (Charger) - 200mAH
6