Maintenance & Care - Bissell SPOTBOT 1711 Serie Guia Del Usuario

Maintenance and Care
1
Press the STOP button to turn the unit off.
Unplug the power cord from the outlet.
Wrap power cord around the cord wrap.
3
If you were using your SpotBot manually,
wrap the vacuum flex hose around the
unit and secure the hose into the hose
connector on the front of the unit.
NOTE: STORE CLEANER IN A PROTECTED, DRY AREA. SINCE THIS PRODUCT USES
WATER, IT MUST NOT BE STORED WHERE THERE IS A DANGER OF FREEZING.
FREEZING WILL DAMAGE INTERNAL COMPONENTS AND VOID THE WARRANTY.
2
Empty and rinse the dirty water/collection
tank after each use. To remove the tank,
lift up the dirty tank latch and pull the tank
out. Dump out the dirty water and rinse.
Replace the tank into the unit for storage.
After using the SpotBot's automated fea-
ture, wipe the window and brushing area
with a soft cloth.
Tips for Storing
• If a significant amount of water
and solution remains in the clean
tank, your unit can be stored with
liquid in the clean tank. However,
if you have added Oxy Boost or
Antibacterial formula into the
clean tank, it cannot be stored in
the unit and should be flushed.
• Keep your machine clean and clean
out the black valve periodically
inside of the dirty water/collection
tank.
www.BISSELL.com
13