Kohler K-T6908 Guia De Instalacion página 7

Valve
Graphics Ring
4. Install the Faceplate and Handle
Remove and discard the plaster guard and/or dome, if installed.
Install the faceplate onto the valve so the notch is to the bottom
and secure with screws. Do not overtighten the screws.
Install the graphics ring to the faceplate, and rotate it clockwise to
lock it in place.
Rotate the valve stem fully counterclockwise.
Fit the sleeve onto the valve.
Secure the handle in place with the screw.
Press the plug button in place.
Kohler Co.
Faceplate
Screw
Handle
7
Valve
Handle
Sleeve
Screw
Plug Button
114487-2-BB