Symbols - RIDGID JobMax R8223412 Manual Del Operador

SYMBOLS

The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL
DANGER:
WARNING:
CAUTION:
NOTICE:
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper in-
terpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
Safety Alert
Read Operator's Manual
Eye Protection
Wet Conditions Alert
No Hands Symbol
Hot Surface
V Volts
A Amperes
Hz Hertz
W Watt
min Minutes
Direct Current
Alternating Current
n o
No Load Speed
.../min Per Minute
MEANING
Indicates an imminently hazardous situation, which, if not avoided, will result in death or
serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result in death or
serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result in minor or
moderate injury.
(Without Safety Alert Symbol) Indicates important information not related to an injury hazard,
such as a situation that may result in property damage.
NAME
Precautions that involve your safety.
To reduce the risk of injury, user must read and understand operator's
manual before using this product.
Always wear eye protection with side shields marked to comply with
ANSI Z87.1.
Do not expose to rain or use in damp locations.
Failure to keep your hands away from the blade will result in serious
personal injury.
To reduce the risk of injury or damage, avoid contact with any hot
surface.
Voltage
Current
Frequency (cycles per second)
Power
Time
Type or a characteristic of current
Type of current
Rotational speed, at no load
Revolutions, strokes, surface speed, orbits etc., per minute
DESIGNATION/EXPLANATION
3 - English