Scales Calibration - Mestra BOOMERANG PRECISION II Manual De Instrucciones

2. BLEEDING THE LIQUID PUMP
When using the unit for the first time or when
connecting the liquid tank, the liquit circuit usually takes
some air and you need to bleed it.
▪ Mount only the small tank filled with liquid and make
sure you have connected the water pipe by pressing
until you hear the "click" (Fig. 1)
▪ Place a bowl to collect the liquid.
▪ Press the START/STOP
▪ The pump will try to pour 25 ml of water.
▪ The error message "Water defect" is likely to appear.
This is normal if the pump was not purged previously.
Press any key to eliminate the error message.
▪ Repeat the process again to make sure the pump is
properly purged and the air comes out without
bubbles.
3.
DOSAGE
▪ Place a bowl to collect the mixture.
▪ Press the START/STOP
dispense the dose selected.
4.
USER SETTNGS
▪ From the home screen, keep pressing the key F.
CUSTOMER .CONFIG
1.0 User
2.0 Calibration
▪ Press again shortly the key F to enter option 1.0 User.
2.0 User
TADVERT = 2 ''
LANGUAGE = English
▪ Use the keys + and – to select the dosing end advisng
time.
▪ Press again shortly the key F and use the keys + and –
to select the language.
▪ Press N to save.
key.
key once for the unit to
5.

SCALES CALIBRATION

Note: Follow this procedure only if necessary (the scale
is weighing incorrectly).
▪ From the home screen, keep pressing the key F.
CONFIG.CLIENTE
1.0 Usuario
2.0 Calibrado
▪ Press again shortly the key F to enter option 2.0
Callibration. Then, press the key F.
2.0 Calibration
2.1 Scales
2.2 Water pump
▪ Use the keys + and – to select option 2.1 Scales.
Then, press the key F.
2.1 Scales
CALIBR.0gr = NO
CALIBR.100gr= NO
RESULT = 1.2
▪ Remove any object from the scale.
▪ Use the keys + and – to select the option
= YES.
CALIBR.0gr
▪ Then, press the key F.
▪ Place an exact weight of 100 grams on the scale.
▪ Then press the F key.
▪ The electronic control will automatically calibrate the
scale.
6.
WATER PUMP CALLIBRATION
Note: Follow this procedure only if necessary (the pump
is dosing the amount of water very wrongly).
▪ From the home screen, keep pressing the key F.
CUSTOMER .CONFIG
1.0 User
2.0 Calibration
English
11