Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ERROR LAMP
If the error lamp is lit, check the following:
1. Is the chargers positive lead
connected to the battery's positive pole?
TRY
2. Is the charger connected to a 12V battery?
3. Has charging been interrupted in >8, 4, 2 or 1?
MODE
TRY
MODE
>8
4
Restart the charger by pressing the MODE-
button. If charging is still being interrupted, the
NORMAL
battery is seriously sulfated or can not accept
charge and may need to be replaced.
Has charging been interrupted in "CARE"?
TRY
MODE
>8
4
The battery can not keep charge and may need
to be replaced.
NORMAL
12 • EN
50018323A Manual, User Instruction TIME TO GO NA, Print file_007.indd 10
GO
GO
CARE
>8
4
2
1
HOURS
2
1
HOURS
NORMAL
AGM RECOND
AGM RECOND
GO
CARE
2
1
HOURS
AGM RECOND
POWER LAMP
MODE
If the power lamp is lit with a:
1. STEADY LIGHT
The mains cable is connected to the wall socket.
CARE
2. FLASHING LIGHT
The charger has entered the energy save mode.
This happens if the charger isn't connected to a
battery in 2 minutes.
TIME TO GO
MAINTENANCE
INSTRUCTIONS
Time To Go (1090) is maintenance-free. The charger must not
be opened; doing so will invalidate the warranty. If the mains
cable is damaged the charger must be returned to the retailer.
TIME TO GO
The charger casing can be cleaned using a damp cloth and
mild cleaning agent. Remove the plug from the power socket
before cleaning.
TRY
>8
4
2
1
NORMAL
AGM RECOND
TIME TO GO
GO
CARE
HOURS
2017-10-12 08:57:51
Publicidad
Tabla de contenido
