Husqvarna WR 250 2012 Caracteristicas - Uso - Mantenimiento página 104

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

WARNING!
Brake fluid quickly ruins painted surfaces;
any spilled fluid should be completely wiped
up immediately.
* Brake fluid may cause irritation. Avoid
contact with skin or eyes. In case of contact,
flush thoroughly and call a doctor if your
eyes were exposed.
Periodically check the connecting hoses (see
"Periodical maintenance card"): if the hoses
(A) and (B) are worned or cracked, their re-
placement is advised.
A
EN - 46
MUM2_WR250-300_2012_GB.indd 46
B
FRONT BRAKING SYSTEM BLEEDING
The braking system must be bled after the fluid replacement
or when, due to air in the circuit, the lever stroke is long and
spongy.
Proceed as follows:
- Remove the rubber cap on the bleeding valve (1).
- Attach a clear plastic hose to the bleeding valve on the brake
caliper and turn the other end of the hose into a container
(make sure that the end of the hose is submerged in brake
fluid during the entire bleeding operation).
1
9-05-2011 18:03:04

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Wr 300 2012Wr 250 2012 usaWr 300 2012 usa

Tabla de contenido