Do not place the multicooker near heat-emitting devices such as heaters, cooktops or electric burners.
Make sure that there is enough space around. The multicooker should stand more than 15 cm far from such flammable objects as furniture, curtains etc.
Don't use the appliance near explosive objects.
Don't move the appliance containing hot food or liquid or when the appliance is connected to electricity network.
Don't leave water or products in the multicooker for a long time.
Pour water into the inner pot only. Don't pour water into the multicooker body.
While cooking avoid using sharp utensils not to damage the inner pot surface. Please use spoon which comes with the multicooker. You may use also wooden, plastic or silicone utensils.
Always check if there are no any foreign objects between pot bottom and heating plate. It may cause smell of burning, strange sounds and cause multicooker malfunction.
If any unusual sounds, odour or any other disruption happens, switch the multicooker off. Make sure that there are no any objects or liquids between the inner pot and heating plate. If malfunction reason
isn't found, please call to customer service. Never attempt to dissemble and repair the multicooker by yourself.
Don't cover the steam relief valve and the lid while the multicooker is operating. It may cause malfunction in multicooker work.
Don't let the multicooker work with empty pot.
While you are cooking the lid and outer surface of the multicooker get hot. Handle or move the multicooker with care. The accessible surfaces may become hot when the appliance is in operation. When
you open the multicooker lid, wait while steam goes out and after that you may get closer.
ATTENTION: Central part of the multicooker lid becomes extremely hot while cooking and may cause burns. Always use lid handle to operate with the lid!
Don't cover or block steam release opening, steam relief valve and float valve.
Don't press on float valve while the multicooker is working.
Don't use the multicooker if sealed ring is absent or damaged. Use sealed ring from multicooker set only.
Before pressure cooking make sure that inner pot contains water or broth. Pressure cooking needs liquid for producing steam.
Make sure that steam doesn't get out in place where lid meets multicooker body.
Never exert force on opening the multicooker lid. Inner pressure in the pot must be equal to atmosphere pressure before opening the lid.
Open the lid only in case when float valve in low position, when pressure inside has become normal and safe.
ATTENTION: Beware of the hot steam that comes out of the steam release opening. Keep hands and face away from the multicooker when you open it to avoid being burnt by hot steam
Always check if steam release opening is clean before using the multicooker.
Keep clean the steam relief valve. Mind to clean it regularly.
Let the multicooker inner pot cool.
Always unplug the appliance after cooking and before taking cooked meal out.
ATTENTION: The multicooker creates pressure and this is a reason for being the appliance with increased risk. It could cause burns and scalds.
SAFETY SYSTEM
The multicooker lid is made to provide maximum safe even when pressure inside is very high.
Lid block is very important part of safety system. You cannot open the lid if the pressure inside is high.
If pressure inside exceeds required, then over pressure relief mechanism starts working. The air will be deflated and pressure will come down.
The multicooker has temperature sensor which works when temperature inside the appliance exceeds required.
If temperature inside is exceeded and the appliance is overheated, then it switches off automatically.
BEFORE FIRST USE
Please unpack your appliance. Remove all packing materials. Remove all stickers from the lid, inner pot and housing.
Please check if all parts of the multicooker are in a set. Please check that every part is not damaged.
Clean all parts according to the "Cleaning and maintenance" article.
32