Maxon 295990-01G Instrucciones De Instalación página 12

NOTE: Holes for mounting brackets are marked and drilled only after liftgate is in correct
position on the pickup bed.
1. Position the LH and RH mounting brack-
ets (Kit items) in the pickup bed just for-
ward of corner posts (FIG. 12-1).
2. Position liftgate in the rear opening of
the pickup bed (FIG. 12-1).
• Liftgate centered on rear opening in
pickup bed
• Columns vertical
• Spare tire access hole aligned with
spare tire tube on truck
• Top of main frame fl ush with fl oor of
pickup bed
NOTE: Ensure nuts and lock washers
are on the inboard side of the
mounting brackets.
3. Bolt the main frame brackets on liftgate,
to the RH mounting brackets as shown
in FIG. 12-1. Hand-tighten bolts and
nuts. Repeat for LH mounting bracket.
LIFT CORPORATION Sht. 12 of 54 DSG#
INSTALLING LIFTGATE
M-15-10
RH MOUNTING
BRACKET
MAIN FRAME
LH BRACKET
BOLTING LIFTGATE TO RH
MOUNTING BRACKET
Rev. D Date: 09/21/18
3/8"-16 HEX BOLT,
3/8" LOCK WASHER
3/8" HEX NUT
(3 PLACES)
MAIN FRAME
RH BRACKET
FIG. 12-1