23. Make sure that the motor has completely stopped before remov-
ing the lid or the jug assembly.
24. Always unplug the appliance before assembling/disassembling it
and before cleaning it!
25. Never open the casing of the appliance. There is danger of
electric shock.
26. Do not use the appliance with accessories of other brands.
27. Check the appliance, the wall socket and the lead cable regu-
larly for wear or damage. In case the lead cable or other parts
appear damaged, please send the appliance or the base to our
after sales service for inspection and repair.
28. Unauthorized repairs can constitute serious risks for the user
and void the warranty.
CAUTION! The cutting knife is extremely sharp. Be very careful
when assembling, disassembling and cleaning the knife.
Never open the housing of the appliance. This can result in
electric shock.
The manufacturer will not be liable in the event of incorrect assembly, improper or incorrect use or if
repairs are carried out by unauthorized third parties.
BEFORE USING THE APPLIANCE THE FIRST TIME
Important: Only use the appliance when properly assembled. The
appliance is provided with a safety switch. It can be switched on only
if the shaker recipient is in place. Should it be possible to switch on
the appliance without shaker recipient, you should send the appliance
to our customer service for control. Keep hands and utensils out of the
jug – danger of injuries!
1.
Remove all packaging materials and any transport safety devices.
2.
Before using the appliance for the first time, clean all parts (see "Cleaning").
3.
Unwind the required cable length and put the plug into a wall socket.
Assembly of the jug
4.
Place the sealing ring (4) on the inner edge of the cutting knife (5).
5.
Place the cutting knife (5) including sealing ring (4) into the jug base (6).
6.
Place the glass jug (3) on the base (6) and turn it clockwise.
7.
Fill the ingredients into the jug.
22
Copyright UNOLD AG | www.unold.de