Garland MULE 1162 NRQG-V18 Manual De Instrucciones página 43

Place the inner reinforcement by screwing onto the
outer mud guards.
6.2.3. ASSEMBLING THE MILLING CUTTERS
Warning! The cutting edge of the blade must be in
the direction of the rotation of the milling cutters.
Install the double blade helix inside the single helix
blades fixing them with the pins and clips provided.
On the exterior, place the plant-protecting plates (3)
fixed with pins (2) and the circlip pin
6.2.4. INSTALLATION OF THE SPUR
Place the spur on the machine and fix to the desired
height using the bolt and clip.
5
6
4
Place the tilling group onto the chassis of the machine
fixing it using the bolt and clips provided.
43/180
English
1
2
3