Getting Started; Mounting The Drop-In Charger; Attaching The Antenna - PRESIDENT PM-2000 WP Manual Del Usuario

Getting Started

Mounting the Drop-in Charger

1. Mount the drop-in charger to either a counter or wall.
To counter:
Attach the drop-in charger
using the mounting screws
and washers as follows.
To wall:
Insert the two mounting
screws into the wall keeping
the same space as the holes
on the charger.
Place the charger with the
screws through the larger
holes then turn the charger.
2. Plug one end of the AC
adapter into the wall outlet
and the other end
into the drop-in charger.
When you mount the drop-
in charger on your boat, use
the DC adapter instead.

Attaching the Antenna

Attach the antenna to the
PM-2000 WP.
Be sure the antenna is firmly
seated.
45