Ashley M9X432 Manual Del Usuario página 12

M9 X 572/M9 X 672
Synchronizing Two Foundations
If simultaneous operation of two foundations is desired, use the sync cord
STEP 1
Unplug foundations from the power source.
If 9V batteries were installed in the power supply, remove them.
STEP 2
Connect the male ends of the sync cord to the female sync plugs of
the control boxes (Refer to illustration below).
SYNCHRONIZING OVERVIEW
Control Box
to connect the electronics of both foundations together.
Female Sync
Plug
Customer Service Toll Free: 1-800-248-5988
STEP 3
Plug foundations back into the power source.
STEP 4
Check to ensure that all cords are securely attached.
Either remote will operate both foundations simultaneously.
Female Sync
Sync Cord
—9—
Control Box
Plug