En English - Xylem YSI MultiLab 4010-2W Guia De Inicio Rapido

English
Overview
Keypad
4

EN English

MultiLab 4010-2W
The MultiLab 4010-2W meter enables you to perform measurements (pH, U,
ION, conductivity, D.O.) quickly and reliably.
The MultiLab 4010-2W meter provides a maximum degree of operating comfort,
reliability and measuring certainty.
Keys are indicated by brackets <..>.
The key symbol (e.g. <ENTER>) generally indicates a short keystroke (under
2 sec). A long keystroke (approx. 2 sec) is indicated by the underscore behind
the key symbol (e.g. <ENTER
<F1> Situation dependent function (is shown on the display)
_
<F1 >
<F4>
_
<F4 >
<On/Off> Switches the meter on or off
<M> Selects the measured parameter
<CAL> Calls up the calibration procedure
_
<CAL > Displays the calibration data
<STO> Saves a measured value manually
_
<STO > Opens the menu for the automatic save function
<RCL> Displays the manually stored measured values
_
<RCL > Displays the automatically stored measured values
<><> Menu control, navigation
<><>
<ENTER> Opens the menu for measurement settings / confirms entries
_
<ENTER > Opens the menu for system settings
<AR> Freezes the measured value (HOLD function)
Switches the AutoRead measurement on or off
<ESC> Cancels an action
<PRT> Sends data to the interface (USB)
_
<PRT > Opens the menu for automatic output to USB
_
>).
MultiLab 4010-2W
ba76195y01 11/2017