Sanus VSF409 Manual Del Usuario página 16

STEP 2B
CAUTION:
Avoid potential personal injuries and property damage!
●
Mount the arm assembly/wall plate
●
Minimum solid concrete thickness: 203 mm (8 in.)
●
Minimum concrete block size: 203 x 203 x 406 mm (8 x 8 x 16 in.)
1. Position the wall plate template
NOTE: For assistance in determining wall plate location, see Height Finder at sanus.com.
2. Drill two pilot holes using a 10 mm (3/8 in.) diameter drill bit.
IMPORTANT
: Pilot holes must be drilled to a depth of 75 mm (3 in.). Never drill into the mortar between blocks.
3. Remove the wall plate template
CAUTION:
Be sure the anchors
1
16
Solid Concrete or Concrete Block Option
15
directly onto the concrete surface
14
on the wall at your desired height. Level the wall plate template and mark the hole locations.
14
and insert two anchors
19
are seated fl ush with the concrete surface.
2
14
19
.
75 mm (3 in.)
10 mm
(3/8 in.)
14
3
19