Technical Data - ANSMANN 2.4 Manual

USE
Capacity display
Press the On/Off button to check the energy remaining.
ƒ ƒ
LED illuminates:
ƒ ƒ
LED flashes:
NO LED ILLUMINATES:
The POWERBANK is completely discharged. Please charge the POWER-
BANK immediately. If the POWERBANK will be unused for an extended
period of time, it is necessary to charge it before storage in order to
avoid the rechargeable battery being damaged.
> CHARGING THE POWERBANK:
Insert the Micro-USB plug of the USB cable into the Micro-USB socket
on the POWERBANK and the USB plug into the USB port on a computer
or a USB charger. The charge process starts automatically. The LED
flashes during the charge process. As soon as the Powerbank is fully
charged, this LED illuminates steadily.
> CHARGING DEVICES:
In order to charge a device, such as a smartphone for example, please
use the USB cable supplied (provided that the Micro-USB plug fits your
mobile device) or the original charge cable for your device. Insert the
USB plug of the cable into the POWERBANK and the other end into your
device. The charge process starts automatically.
Please disconnect your device from the POWERBANK once the charge
process is complete. The POWERBANK switches off automatically if it
is not charging a device. Please note that the Powerbank cannot be
charged and discharged simultaneously.
The POWERBANK may heat up a little depending on the charge/
discharge current.

TECHNICAL DATA

1. Cell type:
2. Capacity:
3. Input:
4. Output:
5. Accessories:
Deutsch |
25% - 100%
1% - 25%
Li-ion rechargeable battery pack
2200mAh / 8.1Wh
Micro-USB – 5V DC / max. 1000mA
USB – 5V DC / max. 1000mA
Charge cable (USB to Micro-USB)
English | Français | Español | Português
Italiano | Nederlands