Cisco Systems Linksys AG241 Guía De Instalación Rápida página 5

C
The Basic Setup screen will
appear with the Setup tab
selected. Based on the setup
instructions from your ISP , you may
need to provide the following
information.
ADSL Settings. The Gateway
supports five Encapsulations: RFC
1483 Bridged, RFC 1483 Routed,
RFC 2516 PPPoE, RFC 2364
PPPoA, IPoA, and Bridged Mode
Only. Each Basic Setup screen
and available features will differ
depending on what type of
encapsulation you select.
VC Settings. Virtual Circuits (VPI
and VCI): These fields consist of
two items: VPI (Virtual Path
Identifier) and VCI (Virtual Channel
Identifier). Your ISP will provide the
correct settings for these fields.
Multiplexing: Select LLC or VC,
depending on your ISP .
Your ISP will provide the correct
settings.
1 RFC 1483 Bridged
Dynamic IP Address
If your ISP says that you are
connecting through a dynamic IP
address, perform these steps:
a
Select RFC 1483 Routed for the
Encapsulation.
b
Select Obtain an IP Address
Automatically for the IP Setting.
Model No.
C
Dynamic IP Address
5